771661
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
HA360BU SONICBRIDGE / LAMP SWITCH
The HomeAware™ SonicBridge™ module HA360BU
allows traditional Sonic Alert receivers to work with the
new HomeAware™ D-RF Securesystem. The
HomeAware™ is the only wireless system available
that is compatible with all Sonic Alert remote receivers
including the SA101, SA201, BL300, RH100 and
SB1000 alarm clock. It also has the added feature of
allowing a lamp to be plugged into it to allow for a
flashing lamp option. To install the SonicBridge™
follow the four steps below.
1. Simply plug the SonicBridge™ into any 120v outlet
(do not plug into extension cords, power strips or
surge protectors) must be plugged directly into the
outlet for the best receiver reception.
2. Plug the opposite end into the back of the
HomeAware™ Main unit where it says Lamp SW.
3. You are now connected to the home power line
which will allow the HomeAware™ to communicate
with your traditional Sonic Alert remote receivers.
4. If you would like to utilize the option of a flashing
lamp for your alerts simply plug any lamp into the
SonicBridge™ and turn the lamp switch to the on
position. Your lamp can now be turned on and off
through the HomeAware Main unit by pressing
the snooze button for on and off.
Important notes for lamp bulb type
Lamp light bulb must not exceed 300 watts. Also make
sure the lamp is in the on position and that the bulb is a
good bulb.
Bulb types to use in lamps are as follows;
Incandescent, LED, and instant on CFL type bulbs
must be used.
FCC Requirements
This device complies with part 15 of the FCC rules, and
with RSS-210 of Industry Canada. Operation is subject
to the following two conditions; (1) This device might
not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are
designed to provide responsible protect against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not interfere in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment on and off, the user is encouraged to thy to
correct the interference by one or more of the following
measures:
i. Reorient or relocate the receiving antenna.
ii. Increase the separation between the
equipment and receiver.
iii. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
iv. Consult the dealer or and experienced radio/
TV technician for help
Modification not expressly approved by the
manufacturer could void the user’s authority to operate
the equipment under FCC rules
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sonic Alert HA360BU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sonic Alert HA360BU in de taal/talen: Engels als bijlage per email.

De handleiding is 0.09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info