296330
4
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
4
VAR Language: en; VAR issue date: 050307
Template 102x140 querleft page (4) of A31Finch en, A31008-H2920-A1-2-7619 (29.12.2005, 11:27)
© Siemens AG 2005, S_Finch_Main.fm
Codes
PIN control
You can stop the PIN prompt being
activated when the phone is switched
on, but you then risk unauthorised use
of the phone.
Press
§Change§. Enter PIN and confirm
with
§OK§.
Change PIN
You can change the PIN to any 4- to
8-digit number you find easier to
remember.
Change PIN2
(Display only if PIN2 is available).
Proceed as with Change PIN.
Change phonecode
You define the phone code (4-8 digits)
when you call up a protected function
for the first time. It is then valid for all
phone-code protected functions.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN), provided by your
service provider with the SIM card, ac-
cording to instructions. If the PUK
(MASTER PIN) has been lost, please
contact your service provider.
Calling
Dialling with number keys
The phone must be switched on
(standby mode). Dial number (always
with area code, if necessary with inter-
national dialling code). To dial interna-
tional dialling code press and hold
0
until a "+" is displayed. Press
§Country§
and select country.
Short press
§Clear§ to clear the last digit,
a long press clears the entire phone
number. To dial press the Call key
A.
Accept call
The phone must be switched on
(standby mode). An incoming call will
interrupt any other use of the phone.
Press
§Answer§ or A.
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing
from loud ring tones!
Handsfree
Activate: Press §Handsfr.§ and switch on
with
§Yes§
. Adjust the volume with E.
Pressing
§Handsfr.§ switches off "hands-
free talking".
Always switch off "handsfree talking" be-
fore holding the phone to your ear! This
will avoid damage to your hearing!
Direct call
If this is active, only one number
can be dialled.
§Menu§ ¢ m ¢ Security ¢ Direct call
Press
D and enter phone code. The
phone code (4- to 8-digits) is set by
you and entered at the first security
setting. Please note this code down! Con-
firm code input with
§OK§.
To dial, press and hold the right
softkey.
To switch direct call off, press and hold
. Enter phone code and confirm with
§OK§. Press §Change§ and Confirm Off with
§OK§.
Text entry
Text entry without T9
Press number key repeatedly until
the required letter appears. After a
brief interval the cursor will advance.
Example:
2
Press once briefly to type the
letter a, twice to type b, etc.
Press and hold to write the
number.
Ä,ä,1-9 Umlauts and numbers are
displayed after the relevant
letters.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens a31 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens a31 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens a31

Siemens a31 Gebruiksaanwijzing - Deutsch - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info