50960
3
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
pag. 1
Manual Indicator SA 250
PCG/C SA 250 Indicator Manual 23-03-07
General
Thank you for purchasing this SATEX precision digital indicator !
This instrument is equipped with reliable technology and has user friendly operational software.
You will use it many times and it will prove itself to be an easy, speedy and accurate tool.
If any questions raise that are not described in this manual, please address yourselves to your SATEX supplier,
have a look at our website : www.satex.nl
or send your questions per email to : info@satex.nl
Application, Weight and Measures certified
The SA 250 digital indicator is designed for accurate and legal weighing, for counting of articles and
for check weighing and filling with settable weight setpoints with LED indicators in the front panel.
The indicator is designed for use in dry, inside conditions, class IP 54. Any 2 mV/V loadcell may be connected
to the indicator.
Take care of a stable position of the connected weighing equipment. Place the equipment in accurate level position
and prevent for vibrations, shocks and radio radiations.
The CE (OIML R76 1992 class III) Certificate of this scale is valid in all European countries.
It is permitted to use a scale, if stamped individually, for weighing for trade purposes.
Safety
Please read this manual thoroughly before start using the scale.
The supplier does not accept any responsibility if the guidelines of this manual are not observed.
Before any work is done on the indicator, power connections from the mains adaptor and the internal battery should
be interrupted. Warranty is void if the scale is opened anyhow.
Breaking of the seal of a stamped scale is a criminal act and causes the complete disapproval of the scale.
The instrument fulfils the requirements laid down in the EG regulations 89/336/EWG and 73/23/EWG for
electromagnetic compatibility and the Council Directive 90/384/EEC for not automatic weighing machines. Exceeding
of the maximum values, laid down in these regulations, must be avoided.
Electrostatic discharges may cause fatal damage to the scale and should be avoided
at all times. I.e. a proper earth connection of the scale and the place of erection is required in such cases.
The mains adaptor has no special protection against humidity and water and should not come into contact with it.
In case this has happened, or the adaptor shows any external damage, the adaptor should not be used any longer.
The built in lead battery should, if it has to be replaced, be disposed off as small chemical waste, not to be added to
normal waste.
Maintenance
Except from regular cleaning with a slightly humid cloth and a not aggressive detergent, further maintenance
is not required. No liquids has to be applied upon the instrument.
However it makes sense to check a scale’s weighing accuracy with regular intervals, using accurate calibration
weights.
Stamped scales are sealed, but a not stamped scale may be adjusted by the user itself using accurate Class M1
weights.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satex SA 250 digital indicator bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satex SA 250 digital indicator in de taal/talen: Engels als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info