50947
3
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
Manual SA 230
page 2
Technical specifications
weigh platform 18 x 14 cm
wei
g
h
p
latform 12 cm
Start up
sst weigh platform -
Unpack the parts : weighing scale
fixing bolt weighing platform ( 12 cm or 18 x14 cm)
platform carrier platform carrier, incl. M3x16 bolt
and hex. key
mains adaptor in carton
mounting cone - Remove with a turning movement the rubber protection lid that
is placed over the mounting cone.
-
Place the platform carrier with a slight turning movement in the
mounting cone and fix it with the M3 bolt. Do not turn on too heavily !
RS data port Before removal of the platform, first turn it carefully.
battery door
-
Set the scale level by means of the 4 levelling feet and the level
power input indicator. Arrange for a stable position of the scale.
(9V adapter)
on/off switch - Plug in the mains adaptor and operate the on / off switch (leeg weegvlak !).
level indicator -
The scale sets automatically zero and is ready for use now.
Caused by differences in temperature it may last until 10 minutes before the reading of the weight is completely
accurate.
Place the articles to be weighed carefully on the weigh platform. Prevent for bumping against and overloading of
the weighing platform. The loadcell down under it may be damaged seriously.
Check, if necessary, the accuracy with an accurate calibration weight. Using the “quick calibration button” the scale
may be re-adjusted in a few seconds.
At first start up the built in battery may be not completely loaded. Re-load the battery by leaving the scale for at
least 8 hours with a connected mains adaptor.
Weighing capacities - 300 g x 0,01 g division
- 600 g x 0,01 g ,,
- 600 g x 0,02 g ,,
- 1200 g x 0,02 g ,,
- 1550 g x 0,05 g ,,
- 3100 g x 0,1 g ,,
Accuracy + of - 2 divisions
Environmental temperature in operation: +5° … +35° C, in stock: -10° … + 55°C
Housing ABS with steel base plate, IP 54 closed,
dimensions 213 x 193 x 66 mm (lxwxh), weight 1,9 kg
Power supply mains adaptor 230 VAC 50 Hz 60 mA, output 9 VDC 500 mA
Operational time on battery 75 / 15 hours without / with display backup lightning switched on
Battery charging time minimal 8 hours for a full charge
Automatic switch off settable: auto switch off after 5, 10, 20, 30 minutes standstill
or switched on continuously
Display back light settable: on, off, or automatic switch on as soon as weigh platform is
loaded with weight (reading > 0)
RS data port (option) 2400 / 9600 Bd (settable), 8 data bits, 1 stop bit, no parity,
CR and LF, fixed string 12 bytes, decimal dot and the
g (gram) sign included, 9-pole male D-connector
WEEGTECHNIEK HOLLAND B.V. Website www.satex.nl
Tel + 31 36 522 20 30
Patroonsweg 23-27 Email info@satex.nl Fax + 31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satex SA 230 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satex SA 230 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satex SA 230

Satex SA 230 Gebruiksaanwijzing - Nederlands - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info