• Dishwasher pelgrim gvw555rvs leave the plates dirty, so it doesn't clean them. After finishing a program it keeps beeping and start button blinks 9 times when I open the door. Does anyone know what's happening?

  Gesteld op 15-10-2019 om 20:41 in forum Pelgrim GVW555RVS Misbruik melden

  • We need more information to remotely guess more accurately:
    1) does the dishwasher heats up the water?
    2) are all filters clean?
    3) can you still change programs (long, short, hot, lukewarm)?
    4) are the holes in the moving arms open? Geantwoord op 15-10-2019 om 21:56

    Waardeer dit antwoord (2) Misbruik melden

  • Thanks for reply.
    
    - Yes, dishwasher can heat up the water (the plates are hot after the cycle)
    - Yes, I cleaned all the filters - nothing was there
    - Yes, all the buttons are working properly
    - Yes, the moving arms are clean too. I took them out and clean the holes just in case. All the holes are opened.
    
    Geantwoord op 16-10-2019 om 10:03

    Waardeer dit antwoord Misbruik melden

  • According to the manual, when the startbutton blinks, you should start the programm you want to use again and hold the startbutton pushed down until the startbutton light goes out.
    Re-select the program and push start.
    This seems to be some sort of reset sequence.
    If all fails consult a local dealer. Geantwoord op 16-10-2019 om 16:55

    Waardeer dit antwoord Misbruik melden

Kent u iemand die het antwoord hierop weet? Deel een link naar deze vraag via email, Twitter of Facebook.

Stel ook een vraag Toon alle vragen Ga naar handleidingen