602937
21
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
FAQs, etc.
40 41
Problem Actions
On screen messages (SD Card)
Frequently Asked Questions / On screen messages
Sound HDMI
No sound is produced
Is "Sound Mute" active? (p. 7)
Is the volume set to the minimum?
Sound level is low
or sound is distorted
Sound signal reception may be deteriorated.
Set "NICAM" (p. 19) in the Sound menu to "Off".
Sound is unusual
Set the sound setting of the connected equipment to "2ch L.PCM".
Check the "HDMI1 input" setting in the Sound menu.
(p. 19)
If digital sound connection has a problem, select
analogue sound connection. (p. 19)
Pictures from external equipment
are unusual when the equipment
is connected via HDMI
Is the HDMI cable connected properly? (p. 34)
Turn Off the TV unit and equipment, then turn them On again.
Check an input signal from the equipment. (p. 37)
Use an equipment compliant with EIA/CEA-861/861B.
The SD card cannot be used
even when it is formatted
Contact the authorized Service Centre.
"Control with HDMI"
function does not work
Switch the TV unit on again with the equipment on.
Set "Control with HDMI" to "Off", then set to "On" again. (p. 32)
Problem Actions
On screen messages Actions / Meanings
On screen messages
All tuning data will be erased
"Shipping condition" will erase all tuning data.
Are you sure ?
Make sure the operation is with your desire.
Recording stopped - TV source changed
Direct TV recording will stop if channel or input source is changed.
Recording in progress
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
Please wait.
A function is in progress.
Please check settings and connections on
HDMI devices.
Communication error in Control with HDMI function (p. 32).
No recording - UNKNOWN REASON
The recording cannot be done by any reason. Check the equipment.
Disc or tape may be full.
No recording -Check Tape or Disc
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
Incorrect PIN Number
The PIN number you entered is wrong.
Feature not available
Check the Q-Link connection and setting (p. 30).
The impossible source (Component / HDMI / PC) to be record.
DOWNLOAD IN PROGRESS PLEASE WAIT
Q-Link channel download is in progress.
No signal can be found in Auto setup.
No stations found
Please insert the aerial
Unable to download, Check Equipment
The tape or disc is active. Stop the equipment and try again.
WARNING
All current tuning data will be erased
Auto setup will be erased all present tuning data (p. 23).
FAQs
TV unit goes into
"Standby mode"
The sleep function is activated.
The TV unit enters "Standby mode" about 30 min. after broadcasting ends.
The remote control
does not work
Are the batteries installed correctly? (p. 6)
Has the TV unit been switched On?
OtherSD
Key not available
You cannot select the same input source between Main and
Sub screen when you are viewing in multi window. (p. 13)
On screen messages (SD Card)
On screen messages Actions / Meanings
Cautions when handling SD Card :
Do not remove the card while the unit is accessing data ("blue" LED
On) (this can damage card or unit).
Do not touch the pins on the back of the card.
Do not subject the card to a high pressure or impact.
Insert the card in the correct direction (otherwise, card may be
damaged).
Electrical interference, static electricity, or erroneous operation may
damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated
or damaged data or erratic operation of the unit. (Panasonic is not
liable for any deterioration or damage of recorded data.)
Blue LED
WARNING: As with an small object, SD
card can be swallowed by young
children. Do not allow children to handle
SD card. Please remove SD card
immediately after use.
Is SD Card in?
SD Card is locked
Please unlock to operate
This le is locked
Please unlock to operate
This type of format is not
supported
This type of card is not
supported
Broken le
Cannot display image
Memory full
Not enough memory
Cannot read le
Unrecordable source
SD recording is stopped
Error
Check card
Card recording in progress
Please stop recording to operate
Insert a SD card.
Unlock the SD card.
Unlock the le in the card.
The unit does not support the format.
(For the applicable formats and data, see p. 38.)
A card not supported by the unit has been inserted.
(For the supported cards, see p. 38.)
The le is broken.
The card memory is full.
The card does not have enough memory to operate.
The le is not readable.
That channel cannot be recorded. (Recording is automatically
stopped.)
Re-insert the card. If the error persists, format
the card. (p. 29)
That operation is not available during recording.
To continue the operation, stop recording.
(
For example, changing channels while recording
)
Delete le?
Displayed when you press Red colour button to delete a
MPEG4 le. Press OK button to con rm deleting.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic TH42PV600EY bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic TH42PV600EY in de taal/talen: Engels als bijlage per email.

De handleiding is 13,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info