20377
106
Verklein
Vergroot
Pagina terug
1/110
Pagina verder
Glossary-1
Glossary
Cassette mode
This is an operation mode for the MP tray. When this mode is
used, approximately 100 sheets of plain paper can be fed
continuously, the same as for the cassette. The cassette mode
is specified as the factory setting, but you can change this
setting from the printer’s operator panel.
dpi (dots per inch)
This indicates the number of dots printed per inch, and is the
unit of printer resolution.
EcoPrint
This is a printing mode that controls toner consumption.
Pages printed in the EcoPrint mode are lighter than pages
printed in the normal mode. The default setting is Off.
Emulation
This refers to emulation of manufacturers’ printers. The
printer emulates operation of the following printers: PCL 6,
KC-GL, Line printer, IBM Proprinter, DIABLO 630, EPSON
LQ-850, and KPDL.
Expansion memory
This option is used to increase printer memory. The printer
has two expansion sockets, into both of which you can install
a 16 MB, 32 MB, 64 MB, or 128 MB DIMM (Dual Inline
Memory Module). See your Kyocera Mita dealer to purchase
the DIMM that is best suited for use with this printer.
First mode
This is an operation mode for the MP tray. If there is paper
inserted in the MP tray, all the paper will always feed from
there even if another paper source is selected.
IEEE1284
This is a standard used when connecting a printer to a
computer, and was established by the Institute of Electrical
and Electronic Engineers in 1994.
KIR (Kyocera Image Refinement)
This is Kyocera Mita’s original smoothing function. It uses
software to enhance the printer’s resolution and produce
high-quality printing. The default setting is On.
Kyocera Mita Digital Library
This is contained on the CD-ROM supplied with the printer.
The contents of the CD-ROM include manuals, printer
drivers, and various utilities.
KM-NET VIEWER
This is a network management tool that can be used with the
Kyocera Mita FS series. You can view information for
printers connected to the network using SNMP commands.
KM-NET VIEWER is contained on the Kyocera Mita Digital
Library CD-ROM supplied with the printer.
MB (mega byte)
This unit is used to express data quantities and memory
capacities. 1 MB is equivalent to 1024 kB, or 1,048,576 bytes.
MP tray
This is an abbreviation for Multi-Purpose tray. The MP tray
is used instead of the cassette when printing on envelopes,
postcards, transparency sheets, and labels.
Offline
The printer can receive data, but cannot print. Turn the
printer online if you want to print.
Online
The printer can output received data.
Operator panel
This is located on the top of the printer. The panel consists of
the message display, four indicators and eight keys. The
message display shows the printer’s status. Press the keys
when you want to switch the printer between online and
offline status, or to cancel printing.
Outline font
With outline fonts, characters’ outlines are represented by
numerical expressions, and fonts can be enlarged, reduced, or
painted in different ways by changing the numeric values of
those expressions. Printing remains clear even if you enlarge
fonts, since the letters are defined by an outline. You can
specify font size in steps of 0.25 points up to 999.75 points.
Parallel Interface
With this interface, data transfer between the printer and the
computer takes place on 8-bit chunks. The printer can
perform IEEE1284 compatible bi-directional
communications.
106

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kyocera FS6020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kyocera FS6020 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info