668721
92
Verklein
Vergroot
Pagina terug
1/94
Pagina verder
86
Trouble shooting
Before you suspect a malfunction, please check the following points.
Power does not turn on
Is the AC adaptor connected to an AC outlet? p.8
Is the [POWER/STANDBY] switch turned on (pressed inward)? p.10
No sound
If your powered monitor system or headphones connected to the correct
jack(s)? p.8
Is the connected monitor system powered-on, and is the volume raised?
Is the MASTER VOLUME knob set to a position where sound will be output?
p.10
Is the 42. MIDI page “Local”(knob [2]) setting turned ON? p.68
Were any volume-related parameters set to a value of 0? p.31, 37, 55, 59
Was the 8. Filt1-A page “Cutoff1” (knob [1]) set to 0? p.32
Was the 37. Filter page “E.F.Sens” set to Hold (FORMANT HOLD) while there
was no input to the [AUDIO INPUT 1] or [MIC] jack ? p.58
Can’t input sound
Is the input source connected to the [AUDIO INPUT 1] jack, the [MIC] jack, or
the [AUDIO INPUT 2] jack? p.10, 21, 34
If you are inputting to [MIC] jack, is the [MIC] switch set XLR p.10, 21, 34
If you are inputting to [AUDIO INPUT 1], is the [MIC] switch set REAR? p.
Is the [AUDIO INPUT1] or [AUDIO INPUT2] knob turned up? p.10, 21, 34
If using a vocoder program, have you connected the modulator audio source to
the [AUDIO INPUT 1] jack or to the [MIC] jack? p.10
Can’t edit
If you are unable to use the knobs [1][4] to edit the parameter value in the
performance edit, Edit mode may be active.
If you are unable to use the knobs [1][4] to edit the parameter value, Perfor-
mance Edit may be active. p.8, 12
If you are unable to edit timbre 2 of a synth program, has 1. Voice page “Mode”
been set to Layer, Split, or Multi? p.23
If you are unable to use the knobs [1][4] to edit timbre 1 or 2 of a synth program,
is the TIMBRE SELECT [TIMBRE 1] or [TIMBRE 2] button blink for the timbre
you want to edit? p.21
If you are unable to use the knobs [1][4] to edit vocoder parameters, is the
[VOCODER] button blink for the vocoder you want to edit? p.21
If the changes you made to a program or to the global settings have not been
remembered, did you turn the power off before executing the Write operation? In
the case of a program, your edits will also be lost if you select a different program.
Execute the Write operation to save your edits before you switch programs or turn
off the power. p.74
Can't write programs or global settings
Is Shift function “PROTECT” turned Off? p.78
If an edited program or edited GLOBAL, MIDI settings you thought you had
saved have not actually been saved, did you select “Global” when you attempted
to save the program, or “Program when you attempted to save the global data?
p.74
Arpeggiator will not start
Is the arpeggiator turned on (ON/OFF button lit)? p.15
Is the 42. MIDI page “Clock” (knob [4]) setting correct? p.68
No response to MIDI messages sent from an external device
Is the MIDI cable or USB cable connected correctly? p.65
Does the MIDI channel of the data transmitted from the external MIDI device
match the MIDI channel of the R3 p.65
Does not respond correctly to MIDI messages sent from an external device
Is the 43. MIDIFilt page parameters for that type of MIDI message set to Enable?
p.70
Transpose, velocity curve, and arpeggiator data is not recognized correctly
Is 40. Global-A page “Position” (knob [4]) set appropriately? p.62
Can't control two timbres on separate MIDI channels
The R3 uses only one MIDI channel to transmit and receive when 1. Voice page
“Mode” (knob [1]) is set to Single, Layer, or Split. You can use two MIDI channels
to play the two timbres independently only when 1. Voice page “Mode” (knob [1])
is set to Multi.
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg R3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg R3 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info