565055
3
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
3
1. Pull off the adjustment dial. To do so, start at the notch
on the bottom of the device.
2. If used, unscrew any fastening screws from the
battery compartment.
3. Release the lock and fold out battery spring.
The battery compartment is now accessible.
4. Insert the batteries.
Ensure that the polarity “+” and “–” is correct.
5. Fold down the battery spring and latch it in.
6. Option: Screw the battery spring to secure the
batteries against removal.
7. Place the adjustment dial back on.
First the software version number and then the
language
deutsch
(German) is displayed.
8. If desired, use the adjustment dial to select a different
language.
9. Confirm the selected language with the OK button.
hour
is displayed.
i
The language selection is only displayed during initial
commissioning. During future battery changes, setting
of time and date is prompted directly.
i
The battery life of new alkaline cells amounts to
approx. 2 years. The batteries need changing when
the symbol flashes. All settings are retained
when the batteries are changed.
WARNING
Explosion hazard!
f Never charge non rechargeable batteries.
f Never short-circuit batteries or throw them
into fire.
f Dispose of used batteries ecologically.
Setting the time and date
1. When
hour
is displayed, use the adjustment dial to
set the current hour and confirm with OK.
minute
is displayed.
2. Use the adjustment dial to set the current minute and
confirm with OK.
year
is displayed.
3. Use the adjustment dial to set the current year and
confirm with OK.
month
is displayed.
4. Use the adjustment dial to set the current month and
confirm with OK.
day
is displayed.
5. Use the adjustment dial to set the current day and
confirm with OK.
The normal display with set temperature and selected
operating mode is displayed.
Checking/changing the time and date
Proceed as follows to check or to change the date and time
later on:
1. Press the PROG button.
2. Select
time date
and confirm with OK.
hour
is displayed.
3. Further checking/changing is carried out as described
above.
Mounting the radiator controller
The radiator controller can be mounted on all common
thermostatic valves with an M30 x 1.5 connection
without draining system.
WARNING
Prevent damage to the radiator controller
through humidity and moisture!
f Mount the radiator controller in dry, closed
rooms only.
f Protect the radiator controller against
humidity, moisture, dust, direct sunlight or
exposure to excessive heat.
Removing the old thermostat head
1.
2.
1. Turn the old thermostat head counter-clockwise until
it stops and loosen the mounting ring.
2. Remove the old thermostat head from the radiator
valve.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honeywell TheraPro HR90 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honeywell TheraPro HR90 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Honeywell TheraPro HR90

Honeywell TheraPro HR90 Gebruiksaanwijzing - Nederlands - 16 pagina's

Honeywell TheraPro HR90 Gebruiksaanwijzing - Deutsch - 16 pagina's

Honeywell TheraPro HR90 Snelstart handleiding - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info