488510
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
3
www.hager.com
6E 6175B
§
Warranty
NOT APPLICABLE FOR AUSTRALIA
A warranty period of 24 months is offered on hager
products, from date of manufacture, relating to any material
of manufacturing defect. If any product is found to be
defective it must be returned via the installer and supplier
(wholesaler). The warranty is withdrawn if:
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary
to IEE wiring regulations and accepted practice within the
industry at the time of installation.
- The procedure for the return of goods has not been
followed. Explanation of defect must be included when
returning goods.
O
F
F
EG071
§
1 channel time switch -
weekly cycle
User instruction
Function
The EG071 is a programmable time switch for
the automatic control of electrical loads.
It is fully programmable with a maximum of
20 program steps. Each program step can be
applied to one or several days, maximising the
use of each memory location.
The display will flash in case of power failure
to the unit.
The front cover is sealable preventing
unauthorised access after completion of
programming.
Presentation
Display :
1 time.
2 circuit status (ON or OFF)
3 Day of the week (1 = Monday, 2 = Tuesday
.. 7 = Sunday)
Buttons :
4 on/off chooses whether the circuit
is ON or OFF.
5 Prog to set the program and scroll
program steps.
6 reset
7 + and -: changes settings.
Time and day setting
Press key + or -”.
A continuous pressure on this key will scroll up
or down minutes, hours and then days.
Programming
1. To start programming, press key
Prog”, the first program step
flashes.
2. Set the switching time with key + or -
3. Use the on/off button to choose between
circuit ON and circuit OFF.
ON = contact between terminals 2 and 3.
OFF = contact between terminals 1 and 2.
4. Enter the settings by pressing Prog”.
You must now choose the days of the
week that the settings apply to.
5. With key + and -”, display one after the other
each day of the week and select with key
on/off if the program applies to this day or not.
Days to which the switching is to be applied
must be visible at the bottom of the display e.g.
1 2 3 4 5 visible, means switching will be applied
Monday to Friday.
6. Press Prog to enter this program step.
If no buttons are pressed within 2 min., the device
switches back to automatic mode without recording
your settings.
7. Program additional time settings by repeating
steps 2 to 6 above (20 max.)
To delete a program step, modify switching time
with keys “+” and “-”, until display -- :-- (between
23 :59 and 00 :00).
8. To record your settings and return to
automatic mode press Prog for more
than 2 seconds.
To turn the circuit ON or OFF
1. press the on/off button.
The display flashes.
2. use the on/off”, button to turn
the circuit ON or OFF.
To switch back in automatic mode, press on/off
for more than 2 seconds.
To check your settings
In automatic mode :
Press Prog repeatedly to display the day, the time
and the circuit status (ON or OFF).
To switch back to automatic mode, press Prog
for more than 2 sec.
To reset the time switch
Press the reset button, the program will be
cancelled.
Electrical connections
Technical specifications
Electrical characteristics
- supply voltage
230VƂ +10%/-15% 50Hz/60Hz
- power consumption = 1 VA
- output 1 changeover contact
µ 16A - 230VƂ AC1
µ 3A - 230VƂ cos
ϕ
= 0.6
- protection degree IP20
- insulation class II
- maximum operating height 2000m
- rated impulse voltage 4 kV
Functional characteristics
- accuracy ± 1sec / day at 20 °C
- operating reserve
lithium battery total of three years
- action type 1B
- degree of pollution 2
- software class A
Environment
- operating temperature -10 to +50 °C
- storage temperature -10 to +60 °C
- temperature for the ball pressure Test
75° and 125°C
Connection tunnel terminals
- flexible 0.5 to 2.5 mm
2
- rigid 0.5 to 4 mm
2
Dimensions
- 1 module (17.5 mm)
Standards
60730-1
60730-2-7
6E 6175B
L
N
65
EG071
21
43
12 3
OFF
on/off Prog
-
+
6
7
4
3
1
5
2
This device must be installed only by
a qualified electrician according to the
installation standards in force in the
country.
Usable in all Europe
å
and in Switzerland
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Hager-EG071

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hager EG071 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hager EG071 in de taal/talen: Nederlands als bijlage per email.

De handleiding is 0,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info