479850
2
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
DESCRIPTION
Gemini 7057
Gemini 7057 is a compact, self-powered alarm with sensors and siren. Studied for vehicles
equipped with original transmitter and direction indicator lights flashing while opening and
closing the vehicles door.
Gemini 7056
As Gemini 7057 without self-power and engine immobilisation.
FUNCTIONS
- Control for alarm arming/disarming through the direction indicators lights and controls for the
vehicles lock actuators.
- Blinker and electronic siren.
- Perimetrical protection and volumetric protection only for Kit 7057US and Kit 7056US.
- Positive and negative control for vehicles equipped with “Pack-comfort” system.
- Engine immobilisation (only 7057).
- Negative control external additional siren.
- Automatic arming.
- Absorption sensor.
- LED’s memory.
The alarm system is supplied with two mechanical keys for the emergency release.
INSTALLATION INSTRUCTIONS (for the installer).
- It is necessary to memorise the arming/disarming sequence controls through the direction indicator
lights after the wiring connections.
- The alarm wiring harness must be positioned away from the vehicle high voltage wires in order to
avoid interference which could generate wrong working of the system.
- On vehicles with catalytic converter, the engine immobilisation must be carried out on the fuel
pump.
- For systems with volumetric sensors (art. 7057US e 7056US), the transducers must be installed at
the top of each windscreen pillar, far from the ventilation or the conditioning air outputs.
- Note : to obtain the correct working of the automatic arming and perimetrical protection functions,
connect the GREEN -BROWN wire to the boot/door switches.
DIP SWITCHES PROGRAMMING TABLE
1 ON Current absorption sensor ON
1 OFF Current absorption sensor OFF
2 ON Passive arming ON
2 OFF Passive arming OFF
3 ON Arming/disarming acoustic signalling OFF
3 OFF Arming/disarming acoustic signalling ON
4 ON Arming/disarming control through the direction indicator lights and the
vehicle lock actuators.
4 OFF Arming/disarming control through the direction indicator lights.
ATTENTION: SELECT THE DIP-SWITCHES BEFORE TURNING THE EMERGENCY KEY TO ON.
ACCORDING TO THE RULES POSITION THE DIP-SWITCH N.1 TO OFF.
WIRING CONNECTIONS
(DISCONNECT THE NEGATIVE TERMINAL OF THE BATTERY AND ONLY RE-CONNECT AFTER THE
INSTALLATION IS COMPLETE)
FUNCTIONS WIRE COLOURS
Earth êê BLACK initialled M
Battery positive terminal êê BLACK initialled R
Engine immobilisation êê 2x GREY initialled H
Ignition live êê YELLOW
Door pin switch êê GREEN-BROWN
Boot/bonnet pin switch êê BLACK initialled V
Positive alarm armed êê PINK
Sensors inlet êê GREEN-BLACK
Negative comfort control additional siren êê YELLOW-BLACK
Positive Comfort control êê RED-BLACK
Negative Comfort control êê WHITE-BLACK
Arming/disarming control through the direction
indicator lights + Blinker.
êê 2 x ORANGE
Arming Synchronism control êê YELLOW-BLUE
Disarming Synchronism control êê GREEN-BLUE
NOTE: connect always the synchronism controls (YELLOW-BLUE and GREEN-BLUE wires) to
the two polarity reversal wires of the L.H.S. actuators lock.
The wiring harness is supplied with two connectors; connect the 4 pin connectors to the ultrasonic
module and the two pin connector to the LED.
SELF-LEARNING FUNCTION OF THE DIRECTION INDICATOR LIGHTS
FLASHING SEQUENCES.
IMPORTANT: BEFORE ACTIVATING THE SELF-LEARNING FUNCTION, IT IS NECESSARY TO SELECT
CORRECTLY THE DIP-SWITCHES AND TO CARRY OUT THE WIRING CONNECTIONS. DO NOT USE THE
TRANSMITTER BEFORE HAVING ACTIVATED THE SELF-LEARNING FUNCTION.
THIS FUNCTION ALLOWS MEMORISING THE SEQUENCE OF THE DIRECTION INDICATOR LIGHTS
FLAHING WHILE OPENING OR CLOSING THE DOOR.
To activate the self-learning function proceed as follows:
- Position the alarm key to OFF.
- Turn the ignition key to ON.
- Position the alarm key to ON.
- The LED of the alarm lights.
- Turn the ignition key to OFF.
- Close the vehicle door with the original transmitter. The LED stops lightning at the first
direction indicator lights flashing. One audible tone signals the door closure.
Note: wait always till the audible tone before learning the door opening.
- Open the vehicle door with the original transmitter. The LED stops lightning at the first
direction indicator lights flashing. Two audible tones signal the end of the self-learning
operation of the 7057 or 7056 system.
THE ACOUSTIC SIGNALLING CAN BE OBTAINED ALSO WITH THE DIP-SWITCH
N. 3 TO ON.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gemini 7057 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gemini 7057 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info