Model IP901 Weatherproof Day/Night Network IP Camera
36
Appendix D. Trouble shooting
1. Could I adjust the effective focus of the IP Cam?
A: The effective focus of the IP Cam is from 30cm to infinity, so, in almost all circumstances
you can see the video clearly. There is no need to adjust the effective focus.
2. What’s the viewing angle of the IP Cam?
A: The viewing angle of the IP Cam is about 56 degrees.
3. What’s the longest distance using the IP Cam to see the video?
A: When using the IP Cam to see a long-distance object, whether it’s clear or not depends on
the size of the object. Usually when your eyes can see something clearly in that distance,
the IP Cam can also see that object clearly in about the same distance.
4. What should I do if the password is forgotten, and the ID/password card is missing?
A: The easiest way to solve this problem is to reset the IP Cam to the factory default. Please
press the reset button on the cable of the IP Cam for more than 4 seconds and release it.
The IP Cam will then restart to the factory default. The default administrator account is
“admin”, administrator password is empty. The default video-play password is “ipcam”. You
can adjust these account and passwords by using the browser to login into the IP Cam and
do the needed modifications.
5. I can see the video in a remote place, but the video quality is not good and
sometimes the video will disconnect and then the video will reconnect again by
itself.
A: It’s probably because the internet bandwidth (internet speed) is not big enough. Please try
to apply for a better internet connection from your Internet Service Provider or decrease
the bandwidth settings of the IP Cam. You can adjust the bandwidth requirement of the IP
Cam either from the CamView software or login into the web configuration page of the IP
Cam to do the modification.
6. Does the IP Cam provide the recording function?
A: You can do the recording of the video of the IP Cam from the CamView software with the
CamView software version later than the version number v1.1. Another software CamPlay
is needed to play the recorded video files.
7. The video seems a little dark when the IP Cam is used inside the house, how could I
improve this?
A: You can increase the “Low light sensitivity” in the “video settings” page either through web
configuration or through CamView settings to “High” or “Very high”. This will tremendously
improve the video quality in dark environment. But please be noticed that when the IR led
is turned on in the dark room, the video will be black and white only.
8. Can I connect the IP camera directly to my PC/notebook with an Ethernet cable?
A: If the IP camera is directly connected to your PC/notebook computer using an Ethernet
cable, the IP camera will automatically use an IP address called “auto IP” with IP address
