708684
4
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
-3- -4-
1,35 - 1,7m
Install your IP video doorphone
A: Ring to app
1. Download the ELRO Intercom app from the Google
Play Store for Android devices or from the Apple App
Store for iPhones.
2. Place the outdoor unit next to your home router and make sure that your mobile
phone and the outdoor unit are using the same WiFi network. Wait unl the colored
ring around the push buon turns blue.
3. Open the app and press the “+” buon to add the new device. Follow the “Smart
Konfig” instrucons in the app. Ensure you have your WiFi password available.
4. If pairing fails, return the outdoor unit to factory
sengs by pushing a needle into the small hole at
the back, approx. 1cm below the LAN adapter and
hold it for 3 seconds; then try again.
5. You are now ready to receive calls from your door
intercom on your mobile phone, both when
connected to your home WiFi network and when
connected to the internet elsewhere.
B: Mounng the devices
6. Take the rainshade and use it to mark the drilling
holes on your wall. Make sure that you can reach
this place from the back with the power adapter
cable and oponally with the door lock cable and
LAN cable. We recommend a mounng hight
between 1,35 and 1,70 meters. Try to avoid
sunlight and direct rain as much as possible.
7. Put the power adapter cable through the
rectangular hole in the rainshade and fix the
rainshade with the screws and dowels supplied
with the set; take out the name plate paper, note
your name and put it back in.
8. Connect the power cable to the outdoor unit (and
oponally the LAN cable and doorlock cable), put
the outdoor unit into the rainshade and fix it with
the inbus screw.
9. Insert 3 x AA baeries (not included) into
the wireless door chime unit and press the
push buon of your outdoor unit. If the
chime does not ring immediately, press and
hold the code-buon (clearly marked with
code”) at the back of the chime for 2
seconds. Then touch the ring buon of the
outdoor unit and the 2 devices will
be paired. Repeat for the other wireless
doorbell.
10. By pushing the melody sign on the side of
the door chime, you can select between 8
different sounds. Just stop pushing the
buon when your desired sound plays and it
will be selected and saved.
C: Mulple users
11. Oponal: If more users want to access this door phone on their own mobile phones,
they just need to download the app and add a device through QR Code. To do this go
to device sengs/QR Code and let them scan your specific device QR code from your
app.
Reset
Code
OPEN
3 x AA baeries
(not included)
ON
OFF
Melody choice
1 3 42
DVC040IP
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-DVC040IP2

Zoeken resetten

  • Beste,

    Ik heb de deurbel geïnstalleerd, en de app. alleen kunnen we deze niet aan elkaar verbonden krijgen.
    niks werkt, de qr code wordt niet gescand, de deurbel zegt niks als we hem opnieuw aansluiten en bij de rest van de knoppen kan de app het apparaat niet vinden.
    hoe kan dit opgelost worden? wat is het probleem?

    graag hoor ik van u terug. Gesteld op 14-3-2023 om 17:38

    Reageer op deze vraag Misbruik melden
  • telefoon blijft bellen nadat iemand op de bel heeft gedrukt Gesteld op 27-7-2020 om 14:51

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro DVC040IP2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro DVC040IP2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elro DVC040IP2

Elro DVC040IP2 Gebruiksaanwijzing - Nederlands - 4 pagina's

Elro DVC040IP2 Gebruiksaanwijzing - Deutsch - 4 pagina's

Elro DVC040IP2 Gebruiksaanwijzing - Français - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info