708653
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Less Sensitive More Sensitive A
To mount the unit, first carefully drill out the required mounting holes that are marked on the rear cover
in oval shape. Next, using the rear cover as a template, mark the position of the drilling holes on the
wall. After drilling the holes, attach the rear cover to the wall using the included screws and wall plugs.
Adding the Home PIR Pet-immune Motion Sensor to the AG4000 Home Alarm System:
The alarm panel will group motion sensors and door/window sensors into 5 security types, each
assigned according to when they will be activated:
- Security Type “0”: Fully Armed. The sensor will be activated only when the system is in
Full Arm mode. This sensor will not be activated in Partial Arm mode. When the sensor is
triggered, the alarm will sound immediately without any preset delay.
- Security Type “1”: Partially Armed and Fully Armed. The sensor will be activated when
the system is either fully or partially armed. When the sensor is triggered the alarm will sound
immediately without any preset delay.
- Security Type “2”: Fully Armed + Delay. Same as Security Type “0”, except when the
sensor is triggered the alarm will sound after a preset Entry delay. This is mostly used for the
main entrance to prevent any accidental triggering of the alarm by the user.
- Security Type “3”: Partial Arm and Fully Arm + Delay. Same as Security Type “1” except
when the sensor is triggered the alarm will sound after a preset Entry delay. This is mostly
used for the main entrance to prevent any accidental triggering of the alarm by the user.
- Security Type “4”: 24Hrs intruder: The sensor will immediately trigger an alarm,
regardless whether the system is (partially) armed or disarmed. This is normally used to
protect areas from any unauthorized access, such as a safe box or an electrical maintenance
room, etc.
When a new sensor is added it needs to be assigned to one of the above security types.
To add the sensor:
1. Power on the sensor by inserting its battery.
2. On the alarm panel, enter the PIN + DISARM Key to disarm the system.
3. Enter your PIN + 15 + [security type number] + PARM to start the binding process. The
DISARM LED will start to blink for 30 seconds with a beep tone.
4. Within 30 seconds, set the sensor to enter binding mode using the tamper button shown in the
image on the first page.
5. When the sensor has successfully been added, the DISARM LED will turn on for 1 second
along with a long beep sound. A keypad LED will turn on to indicate the allocated zone number.
(Numbers 1 9 for zones 1 9, Number 0 for Sensor Zones 10 and above).
6. If the binding process fails, it will timeout after 30 seconds and 3 short beeps will be heard.
7. To exit the binding process, press the DISARM key.
IMPORTANT WARNING:
This package can contain small parts and/or material which can be dangerous to small
children! Be aware of this, and keep this away from small children!
For more information about the ELRO AG4000 Home Alarm System visit
www.elro.eu
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro AG40PP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro AG40PP in de taal/talen: Engels als bijlage per email.

De handleiding is 0,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elro AG40PP

Elro AG40PP Gebruiksaanwijzing - Nederlands - 6 pagina's

Elro AG40PP Gebruiksaanwijzing - Deutsch - 3 pagina's

Elro AG40PP Gebruiksaanwijzing - Français - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info