708646
3
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
3. You will receive an SMS message saying the phone number was set successfully.
4. Your alarm panel can now be controlled from your phone via app and SMS (Step 9).
1. The alarm panel’s built-in microphone can record your message.
On the alarm panel enter the following:
2. When the record button flashes green, speak into the alarm panel’s microphone to
record a brief alarm message. The maximum length of the message is 10 seconds.
3. When the light stops flashing, the panel will play back the alert message.
Note: Included accessories are pre-binded with the alarm panel at
the factory and ready for use.
1. Test the communication link by pressing disarm on the
remote
2. The red indicator on the remote should light up, and the alarm
panel should sound a long beep.
1. RFID tags can be used to disarm the system.
2. Arm the system using the remote control, ensure that the
ARM icon lights up.
3. Hold the RFID tag near the panel in front of the small hand icon
after arming the system.
4. You should hear a long beep and the disarm indicator should
light up.
5. Several RFID tags can be added and each can have a different number.
1. Put the alarm panel in test mode by inputting:
The disarmed icon will flash when in this mode.
2. Press and release the tamper switch inside the PIR motion sensor (pictured on the right) until
the alarm panel makes a chime sound.
3. Place the rear cover back on the PIR motion sensor.
1. Leave the system in test mode.
2. Press and release the tamper switch on the back of the
sensor until the alarm panel makes a chime sound.
With the "ELRO Home Alarm" app you can remotely access the ELRO
Home alarm system from your smartphone. You can easily disarm and
(partially) arm your alarm system, and receive alert messages on your
smartphone when emergencies occur.
1. On the Google Play Store or Apple App Store, search for “ELRO Home Alarm” and install the
app.
2. Add a new system and choose a name, then enter the phone number belonging to the SIM
card you have inserted into the alarm panel.
3. Select the newly created system from the home screen (Image D below)
4. Then click on the status button to request the current status of the system. (Image E below)
5. A pop-up will appear asking to send an SMS to request the current system status. Select ok.
(Image F below)
6. An SMS with the system status will be sent to your phone. (Image G below)
Step 7 – Testing the PIR motion sensor (SP831)
Step 9 – Smartphone app Setup
Step 4 – Record an alert voice message
Step 5 – Test the remote control (SR401 )
Step 6 – Test the RFID key tag
Step 8 – Test the door / window contact (SM831)
1234
1234
03
Important: If the siren goes off at any point during the setup, press
the Disarm button on the remote to immediately turn off the siren
Important: Make sure you’re installing the app on the same phone you used in Step 2.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-AG400011---Home-Alarm-System

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro AG400011 - Home Alarm System bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro AG400011 - Home Alarm System in de taal/talen: Engels als bijlage per email.

De handleiding is 1,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elro AG400011 - Home Alarm System

Elro AG400011 - Home Alarm System Snelstart handleiding - Nederlands - 5 pagina's

Elro AG400011 - Home Alarm System Gebruiksaanwijzing - Nederlands - 236 pagina's

Elro AG400011 - Home Alarm System Snelstart handleiding - Deutsch - 5 pagina's

Elro AG400011 - Home Alarm System Gebruiksaanwijzing - Deutsch - 12 pagina's

Elro AG400011 - Home Alarm System Gebruiksaanwijzing - English - 15 pagina's

Elro AG400011 - Home Alarm System Snelstart handleiding - Français - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info