810843
30
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
ROUTINE MAINTENANCE
Any type of job done on the appliance must
only be performed by a qualified technician
and AT LEAST ONCE A YEAR.
Cleaning the hearth
- Open the door and delicately remove all the cera-
mic elements.
- Delicately brush and reposition all the ceramic ele-
ments and if necessary change the damaged ele-
ments.
- Check all the door seals (including glass) and close
again.
- Brush the gas outlet holes (flames) on the burner.
Check the burner and for any gas leaks
- Make sure the burner is clean and check its inte-
grity.
- Check the gas outlet safety system. If necessary
adjust the burner. The technician must also check
the regulation pressure at the burner inlet.
- Check the existence of any gas leaks in the
system.
- Proceed to check the ignition.
Checking the fireplace.
Check the correct operation of the fume exhaust and
combustion air suction pipes.
Only use the Manufacturer’s original spare
parts. The use of non-original parts will
immediately invalidate the warranty. These could
also be hazardous and damage the appliance.
The Appliance must only be used for the
purpose intended by the Manufacturer and
for which it was expressly designed and made.
The Manufacturer disclaims any contractual and
non-contractual liability for injuries and damage
caused to people, animals or things as a result of
the wrong installation, regulation, maintenance
or improper use of the Appliance.
Spare parts and/or technical jobs require the
prior identification of the model of appliance
to which they refer.
The tampering, removal, lack of Technical Plate,
etc., will not allow the correct identification of the
product and will make installation operations and
subsequent maintenance jobs difficult.
FAULTS AND SOLUTIONS
THE PILOT LIGHT DOES NOT IGNITE OR WORK
- Make sure the pilot burner flame is of the correct
size for the type of gas used.
- The flame must converge on the thermocouple sen-
sor.
- Make sure the pilot flame has been regulated.
THE MAIN BURNER DOES NOT WORK
- Make sure the pressure and volume of the gas sup-
ply to the appliance is adequate. Check by connec-
ting a pressure gauge to the gas pressure point on
the gas valve.
- Ignite the appliance and allow it to operate at maxi-
mum output. Close all the other gas appliances in
the house and calculate the quantity of fuel burnt by
reading the meter.
Before arranging any element, make sure
burner combustion is correct. The flame
must be uniform over the entire burner surface.
THE PILOT FLAME DOES NOT IGNITE OR DOES
NOT STAY ON
- Make sure the gas tap is open on the appliance
and on the meter/tank.
- Keep the control knob pressed for at least 20
seconds after the ignition of the pilot flame to ensure
operation of the thermocouple safety valve.
- Make sure the injector of the pilot burner is not
blocked by dust or dirt.
- Make sure the thermocouple has not been dama-
ged during transport. This electromagnetic device is
in fact very delicate.
- In case of an LPG fuelled system, make sure there
is gas in the tank.
- Check the efficiency of the batteries in the control
unit and the remote control.
- Gently clean the ignition electrode.
- Check the connection cable of the ignition, without
stretching to prevent disconnection.
30 CUSTOMER SERVICE
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Edilkamin EK70 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Edilkamin EK70 in de taal/talen: Engels als bijlage per email.

De handleiding is 12.82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Edilkamin EK70

Edilkamin EK70 Gebruiksaanwijzing en installatiehandleiding - Deutsch - 34 pagina's

Edilkamin EK70 Gebruiksaanwijzing en installatiehandleiding - Français - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info