624833
6
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Operation Guide 5394 (OC)
E-47
To swap your Home City and World Time City
1. Hold down A for about three seconds until the watch beeps.
x This will make the World Time City (NYC in this example) your new Home City. At the same time, it
will change the Home City you had selected (TYO in this example), to your World Time City.
x After swapping the Home City and World Time City, the watch will stay in the World Time Mode. The
2
Second Hand will point to your new World Time City (TYO in this example).


Note
x If your current World Time City supports time calibration signal reception, making it your Home City
enables calibration signal reception for that city.
E-46
5. Push the crown back in to exit the city code setting mode.
x If you do not perform any operation with the crown for about two minutes after pulling it out, crown
operations will become disabled. If this happens, push the crown back in and then pull it out again.
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This capability can come
in handy when you frequently travel between two locations in different time zones.
The following example shows what happens when the Home City and World Time City are swapped while
the Home City originally is TYO (Tokyo) and the World Time City is NYC (New York).
Home City World Time City
Before swapping
Tokyo
10:08 p.m.
(Standard time)
New York
9:08 a.m.
(Daylight saving time)
After swapping
New York
9:08 a.m.
(Daylight saving time)
Tokyo
10:08 p.m.
(Standard time)
E-45
To view the time in another time zone
1. In the Timekeeping Mode, press B once to enter the World Time Mode.
x The
5
Lower Dial Hand will move to WT.
x To select the UTC zone as your World Time, simply hold down C for about three seconds. No other
operation is required.
2. Pull out the crown.
x The
2
Second Hand points to the currently selected World Time city code.
x The
5
Lower Dial Hand will indicate AUTO, STD (standard time) or DST (daylight saving time),
which indicates the current daylight saving time setting.
x This indicates the city code setting mode.
3. Rotate the crown to move the
2
Second Hand to the city code you want to select as the World Time
City.
x Each time you select a city code, the
1
Hour Hand,
3
Minute Hand, and
6
Day Indicator move to
the current time and day for that city code. For details about city codes, see the “City Code Table” at
the back of this manual.
x If you think that the time indicated for the selected World Time City is not correct, it probably means
that there is something wrong with your Home City settings. Use the procedure under “To confi gure
Home City settings” (page E-27) to correct the Home City settings.
4. Hold down A for about one second to cycle through the summer time settings as shown below.
AUTO STD DST
AA
A
x For details about AUTO, STD, or DST, see “STD/DST Switching” (page E-28).
E-44
Checking the Current Time in a Different Time Zone
You can use World Time to view the current time in one of 29 time zones around the globe. The currently
selected city is called the “World Time City”.
Hands and Indicators
1
Hour Hand: Indicates the hour of the current time in the World Time City.
2
Second Hand: Indicates the current World Time City for about three
seconds after the World Time mode is entered.
3
Minute Hand
5
Lower Dial Hand: Points to WT.
6
Day Indicator
x Pressing A causes the
2
Second Hand to move to the current World Time
City for about three seconds.
Important!
x Time calibration signal reception is disabled while the watch is in the World
Time Mode.

NYC (NEW YORK)
E-43
Location
x Taking a direction reading when you are near a source of strong magnetism can cause large errors
in readings. Because of this, you should avoid taking direction readings while in the vicinity of the
following types of objects: permanent magnets (magnetic necklaces, etc.), concentrations of metal
(metal doors, lockers, etc.), high tension wires, aerial wires, household appliances (TVs, personal
computers, washing machines, freezers, etc.).
x Accurate direction readings are impossible while in a train, boat, air plane, etc.
x Accurate readings are also impossible indoors, especially inside ferroconcrete structures. This is
because the metal framework of such structures picks up magnetism from appliances, etc.
Storage
x The precision of the bearing sensor may deteriorate if the watch becomes magnetized. Because
of this, you should store the watch away from magnets or any other sources of strong magnetism,
including: permanent magnets (magnetic necklaces, etc.) and household appliances (TVs, personal
computers, washing machines, freezers, etc.).
x Whenever you suspect that the watch may have become magnetized, perform the procedure under
“To perform bidirectional calibration” (page E-40).
E-42
Digital Compass Precautions
Magnetic North and True North
The northerly direction can be expressed either as magnetic north or true
north, which are different from each other. Also, it is important to keep in
mind that magnetic north moves over time.
x Magnetic north is the north that is indicated by the needle of a
compass.
x True north, which is the location of the North Pole of the Earth’s axis, is
the north that is normally indicated on maps.
x The difference between magnetic north and true north is called the
“declination”. The closer you get to the North Pole, the greater the
declination angle.
True north
Earth
Magnetic north
E-41
To perform northerly calibration
Important!
x If you want to perform both northerly and bidirectional calibration,
perform bidirectional calibration fi rst, and then perform northerly
calibration. This is necessary because bidirectional calibration cancels
any existing northerly calibration setting.
1. While a compass operation is being performed, pull out the crown.
x The
2
Second Hand and
3
Minute Hand will move to 12 o’clock, and
the
1
Hour Hand will move to 6 o’clock.
2. Press B. The
1
Hour Hand will move to 12 o’clock.
3. Place the watch on a level surface, and point 12 o’clock of the watch in
the direction you want to set as north.
4. Press A to start calibration.
x After about seven seconds, the
2
Second Hand will move to Y (YES) if
calibration was successful or to N (NO) if it was not successful.
x If the
2
Second Hand is pointing at N (unsuccessful), press A to
perform calibration again.
5. After calibration is complete, push the crown back in.
x This will start a magnetic north reading operation.
x Press B to return to the Timekeeping Mode.
Note
x To clear northerly calibration, perform bidirectional calibration.


Y
N
Direction you want to set
as north
E-40
To perform bidirectional calibration
1. While a compass operation is being performed, pull out the crown.
x The
2
Second Hand and
3
Minute Hand will move to 12 o’clock, and
the
1
Hour Hand will move to 6 o’clock.
2. Press A to start calibration of Point 1.
x After about seven seconds, the
2
Second Hand will move to Y (YES) if
Point 1 calibration was successful or to N (NO) if it was not successful.
x If the
2
Second Hand is pointing at N (unsuccessful), press A to
perform Point 1 calibration again.
x If the
2
Second Hand is pointing at Y (successful), it will move to
6 o’clock after about two seconds.
3. Rotate the watch 180 degrees.
4. Press A to start calibration of Point 2.
x After about seven seconds, the
2
Second Hand will move to Y if Point
2 calibration was successful or to N if it was not successful.
x If the
2
Second Hand is pointing at N (unsuccessful), press A to
return to Point 1 calibration.
5. After calibration is complete, push the crown back in.
x This will start a magnetic north reading operation.
x Press B to return to the Timekeeping Mode.


6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5394 - OCW-P1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5394 - OCW-P1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info