578012
4
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
4
ENGLISH
Fig. A
8. Set key
9. Measurement system key
10. Memory recall key
11. Multiply key
12. Add key
13. Subtract key
14. Store key
15. Sum key
Assembly
Fitting the battery (fig. B)
Remove the battery cover (7) from the tool.
Connect the battery to the connector. The larger battery
terminal connects to the smaller connector terminal.
Refit the cover and let it click into place.
Use
Setting the tool (fig. A, C & E)
The tool can show the results measured from either the front
(18) or the back (19).
To switch from one measurement method to the other,
press key (8).
Setting the measuring head (fig. E)
Turn the measuring head. Do not set the head at
intermediate angels, as this will lead to inaccurate results.
Selecting the measurement system (fig. A & D)
The appliance can show the results both in the metrical (16)
and the imperial system (17).
To switch from one measurement system to the other,
press key (9).
Memory function (fig. A & D)
The use of the memory function (20) is indicated on the display.
Press key (14) to store the value on the display in the
memory. The value remains stored as long as the
appliance is switched on.
Press key (14) again to clear the memory.
Switching on and off (fig. B)
To switch the tool on, slide the on/off switch (1) to
postion I.
To switch the tool off, slide the on/off switch to position 0.
Measuring (fig. A)
Hold the tool at the required position with the measuring
head aimed at the opposite surface.
Press key (5). The result appears on the display (4).
Note:
- During a measurement the laser dot helps identifying the
opposite surface.
- After 15 seconds of inactivity the LCD screen will go
blank. The last measurement data will not be retrieved
unless it has been stored in the memory.
Measuring distances (fig. A)
Measure the first distance
Press key (12).
Measure the following distance.
Repeat the previous instruction as many times as required
for the remaining distances.
Press key (15). The result appears on the display (4).
Measuring areas (fig. A)
Measure the length.
Press key (11).
Measure the width.
Press key (15). The result appears on the display (4) in
square units.
Measuring volumes (fig. A)
Measure the length.
Press key (11).
Measure the width.
Press key (11).
Measure the height.
Press key (15). The result appears on the display (4) in
cubic units.
Hints for optimum use
Use the tool only in an open space, without obstacles in
the measuring path.
During a measurement avoid moving the tool until the
distance is displayed.
To ensure a correct reading, repeat the measurement until
you get at least 2 of the same readings within 3 attempts.
For successful measuring results, consider the following
conditions:
- The measured object surface must be flat and hard.
- Distance measuring through glass is not possible.
- When the distance is out of the work range, the tool
will beep and register an error.
Low battery indicator (fig. D)
The LCD screen will display a low battery symbol (21) when
the battery is nearly empty.
Replace the battery on time.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDM100 T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDM100 T1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker BDM100 T1

Black Decker BDM100 T1 Gebruiksaanwijzing - Polski - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info