572348
3
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
5019 401 15073
Add the detergent as described in the chapter
“Detergent and Additives” in the booklet.
1. Turn the programme selector knob in
any direction to the desired programme.
The remaining time display shows the
duration of the chosen programme
(in hours and minutes) and the pilot lamp
above the “Start/Pause” button is
flashing.
2. The programme sequence indicator and
the indicator with the maximum possible
spin speed light up.
3. The temperature can be altered by pressing
the “+” or “-” button under the
corresponding LED display.
“Prewash” button
Only for heavily soiled laundry (for
example sand or granular dirt).
Programme duration is increased by some
15 min.
“Intensive Rinse” button
An additional rinse cycle is carried out.
This additional option is particularly
suitable for areas with very soft water, for
washing baby linen and helping people
with detergent allergies.
“Rinse Hold” button
The laundry remains in the last rinse
water without being spun: discoloration
of the laundry and additional creasing are
prevented.
This additional option is particularly
recommended for the programme
“Synthetics” or “Delicates”.
This additional function is particularly
useful if you want to postpone spinning
to a later time.
Note: the programme has reached the “Rinse
Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
Press the “Rinse Hold” button again; the
programme will terminate automatically
with the appropriate spin cycle for the
current programme.
If you do not wish to spin the clothes, turn
the programme selector knob to
“Draining/Clearing” and press theStart/
Pause” button again.
“Speed Reduction” button
A maximum spin speed is assigned to each
programme.
Press the button to set another speed for
the spin cycle.
CONSUMPTION DATA
*
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Programme duration **
approx.
(hours : minutes)
White Cotton 95 5,0 44*** 1,60 1:55
Coloured cotton 60 5,0 39 0,95 2:00
Coloured cotton 40 5,0 39 0,55 2:00
Synthetics 60 2,5 55 0,70 1:30
Synthetics 40 2,5 50 0,50 1:15
Rapid wash 30 3,0 35 0,40 0:30
Delicate 30 1,5 50 0,50 0:45
Wool 40 1,0 50 0,50 0:40
Handwash 30 1,0 35 0,40 0:35
* Consumption values were measured in normalized conditions in compliance with Standard IEC 60456.
** The programme duration may also vary from the chart values. The washing machine is able to allow for
particular household conditions and to adapt the programme run time accordingly.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before
the pump drains the water out.
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
SELECT SPECIAL OPTIONS - The
indicator lights go on.
If the spin speed “0” is selected, the final
spin is cancelled. The water is drained out
only.
“Easy Ironing” button
To lessen creasing, the water quantity is
increased and the clothes are spun very
gently at reduced power. This makes your
laundry significantly damper at the end of
the programme.
“Eco Wash” button
The duration of the wash is extended and
the temperature reduced. This saves you
up to 30% energy and maintains good
washing results.
The “Start Delay” allows to run the machine
at the consumer’s convenience, for example
at night when electricity is cheaper.
Press the “Start Delay” button. Select the
programme start from 1 to 19 hours
ahead by pressing the button again.
Press the “Start/Pause” button. The
Start Delay indicator light flashes until the
programme starts.
During programme start the remaining
time appears in the digital display.
“Start Delay” correction.
Before the “Start Delay” has been started:
The preset number of hours can be
altered by continuously pressing the
“Start Delay” button.
The number of hours can be reduced by
first turning the programme selector
switch to the “Off” position. Then set the
programme again and select the desired
number of hours.
After the “Start Delay” has been started:
The preset number of hours can be reduced
by pressing the “Start Delay” button again.
To increase the number of hours
preselected, first turn the programme
selector switch to the “Off” position. Then
set the programme and the additional
options again and select the desired
number of hours.
After you have selected the programme and
the additional option, the indicator light
over the “Start/Pause” button flashes. Turn
on the tap and start the programme by
pressing the “Start/Pause” button. Now the
indicator light above the button goes on.
In addition, all programme phases are
indicated by the associated lights. After the
end of a programme phase the associated
indicator light goes out. Thus the
programme sequence indicator moves from
left to right across the wash, rinse and spin
phases. At the end of the programme only
the “End” indicator is still on.
In the first 15 minutes after the start of the
“Cotton”, “Coloured Cotton” and
“Synthetic” programmes the door can be
opened to add further laundry. This is not
possible if “Rapid Wash” is selected.
The remaining time display shows “0:00”
and the “End” display lights up.
1. Turn the programme selector knob to the
“Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
A newly-selected programme will continue
in the same programme section during
which the current programme was
interrupted. Therefore do not add any more
detergent.
1. Press the “Start/Pause” button to
interrupt the programme. The indicator
light flashes.
2. Select the new programme (with
temperature), any additional options and
- if you wish - another spin speed.
3. Press the “Start/Pause” button again to
restart the programme.
If you are in the “Prewash” programme
step this additional option can not be
deselected as described (to do this see
“Interrupt/Cancel Programme).
1. Press the “Start/Pause” button to
interrupt the programme. The indicator
light flashes.
2. Set the programme selector to “Draining/
Clearing”. The spin speed “0” and the
remaining time “2 minutes” are displayed.
3. Press the “Start/Pause” button to start
the “Draining/Clearing” programme.
START DELAY
PROGRAMME START
DOOR LOCK
PROGRAMME END
RESELECT AFTER PROGRAMME START
CANCEL/DELETE PROGRAMME
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WA 89880 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WA 89880 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht WA 89880

Bauknecht WA 89880 Gebruiksaanwijzing - Deutsch - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info