611192
25
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
Push to Talk (IP Touch 610 WLAN)
25
7
Other
The Push-to-talk feature allows the IP Touch 610 WLAN to operate in a push-to-talk (PTT) group broadcast mode in addition
to the standard telephone operation.
The IP Touch 610 WLAN telephone supports 8 multicast channels. The channel used is saved in the telephone memory. A PTT
call is initiated by pressing the Talk button located on the right side of the handset. All IP Touch 610 WLAN monitoring that
channel and that have enabled the PTT feature in the user preferences menu will hear the transmission through group listening..
PTT dialogue is interrupted when you answer a PBX call. When the PBX call is ended, PTT dialogue resumes if in an active call.
The 'Push-to-talk' function, activated by the system administrator can be configured by the user via the set local menu (OK key,
'Push-to-Talk' function).
7.1
Start the call
The call period. The two-way radio operates on the concept of a push-to-talk session or call period. The push-to-talk call period
begins with the first transmission and ends when there has been no traffic on the channel for 10 seconds. The keypad cannot be
used for any other function. However, it is possible to place a PBX call.
7.2
Adjusting the volume level of the tones
7.3
Subscribing to channels
Once they are subscribed, the channels automatically appear in the list of default channels.
The 'start transmit ' sound indicates
that you can start talking'
press and
release the 'talk'
button
press the 'talk '
button- (press and
hold down the key)
talk with the
handset 2 inches (5
cm) away
The IP Touch 610 WLAN then enters the
waiting state where it monitors the
channel for up to 10 seconds
release the 'talk '
button
adjust audio
volume
OK
OK
Push to talk
OK
OK
Tone Volume
OK
OK
OR
OK
go to the channel
and select it
OK
OK
Push to talk
OK
OK
Subscribed chans
OK
OK
7.4
Making a call on another channel
You may need to make a call on another channel than the one defined by default. You must first subscribe to new channels.
7.5
Receiving a call
Upon receiving a PTT transmission, the phone plays the 'receiving alert' sound and enters the receive state. In this state the phone
receives all conversations on the selected channel. The phone will ignore the Talk key while in the receive state. The screen shows
the current active channel, the caller ID information of the current transmitter, and an indication that the phone is receiving a
broadcast transmission. During a 'PBX' conversation, the IP Touch 610 WLAN is not able to receive a PTT transmission. At the
end of a transmission, the phone enters the waiting state where it monitors the channel for up to 10 seconds and displays 'Waiting'
on the screen. If no other transmission occurs within 10 seconds the phone plays the 'end call' sound and reverts to idle state.
7.6
Selecting a channel
To add channels to the default list of channels, see the channels subscription function.
press and
release the 'talk'
button ( twice)
select the channel using the
navigator or the volume
level adjustment keys
start the call ('talk' key
pressed and held down)
OK
OR
OK
go to the channel and select it
OK
OK
Push to talk
OK
OK
Default Channel
OK
OK
OK
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alcatel IP Touch 310 WLAN Handset bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alcatel IP Touch 310 WLAN Handset in de taal/talen: Engels als bijlage per email.

De handleiding is 4,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Alcatel IP Touch 310 WLAN Handset

Alcatel IP Touch 310 WLAN Handset Gebruiksaanwijzing - Deutsch - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info